Including filter system and high-performance 1,1,1-Trichloroethane filter.
1,1,1-Trichloroethane is a synthetic solvent that can enter drinking water when industrial degreasers or similar chemicals reach groundwater. As a volatile organic compound (VOC), it can affect water used for drinking, cooking, bathing and cleaning—not just what you pour in a glass. It often doesn’t change the water’s appearance, and any smell may be subtle, so many Medart homeowners choose professional water testing to determine whether it’s present.
If testing shows 1,1,1-trichloroethane above recommended levels, treating the water where it enters your home is a common solution. A whole-house system protects every tap and appliance in Medart, covering routine uses like showers and laundry as well as the kitchen sink. This approach cuts daily exposure without asking you to alter household habits, and the right setup will target VOCs while maintaining normal flow and pressure throughout your plumbing.
The single most effective filter type for reducing 1,1,1-trichloroethane is a high-quality activated carbon filter formulated for VOC removal. Activated carbon removes many solvent-style contaminants through adsorption as water passes through the media. For whole-house use in a Medart residence, this is typically installed as a large carbon tank rather than a small under-sink cartridge so there’s enough contact time to treat the home’s full flow, including both hot and cold water lines.
Because 1,1,1-trichloroethane is a VOC, removal depends on carbon quality, the amount of media and the flow rate through the tank. A whole-house activated carbon system should be sized to your household’s demand so water moves slowly enough for effective adsorption, and the media must be replaced periodically since carbon becomes exhausted. Mr. Pure Water can help Medart homeowners interpret test results and choose a properly sized carbon-based whole-house filter for their specific needs.