Including filter system and high-performance 6:2 FTS filter.
6:2 FTS is one form of PFAS that can enter drinking water when products or firefighting foams containing these chemicals reach the environment and move into water sources. In Bascom households you won’t necessarily detect it by smell, taste, or cloudiness, which is why many homeowners only learn about it after testing or advisories. Because 6:2 FTS can persist and travel with water, families often choose point-of-entry solutions so treated water is protected for showering, cooking, laundry and every tap inside the home.
When people in Bascom hear concerns about unhealthy levels of 6:2 FTS, the focus is usually on lowering overall exposure rather than fixing an obvious cosmetic problem. Like other PFAS, 6:2 FTS is chemically stable and can be harder to remove than many routine contaminants, especially at low concentrations. That makes the selection of a targeted treatment important — typical carbon cartridges are not all equal — so testing your water and choosing a PFAS-focused whole-home option is the most practical next step.
For treating 6:2 FTS across an entire Bascom home, a single high-capacity activated carbon system designed for PFAS is often the most effective choice. Activated carbon adsorbs many organic contaminants on its surface, and carbon media selected and sized for PFAS improves contact time and removal performance. Installed at the point where water enters your house, a whole-house carbon tank treats every tap and avoids the complexity of multiple under-sink units with limited media volume.
Because PFAS like 6:2 FTS are affected by flow rate and contact time, properly sizing a whole-house activated carbon filter for your Bascom home is as important as choosing the right media. The system should be matched to household demand so water moves slowly enough through the carbon bed for adsorption to occur. Since carbon eventually becomes exhausted, routine media replacement is necessary to maintain performance. Mr. Pure Water can help Bascom homeowners select and size a PFAS-focused whole-house carbon system that meets their filtration goals.