Including filter system and high-performance 6:2 FTS filter.
6:2 FTS is one of the PFAS that can reach drinking water when products or firefighting foams enter the environment and migrate into sources used for homes. Often there’s no noticeable change to taste, smell, or clarity, so many Windsor residents only discover it after testing or an advisory. Because 6:2 FTS can persist and travel in water, homeowners commonly seek point-of-entry solutions so showers, cooking, laundry and every tap are treated before use.
When people hear about unhealthy levels of 6:2 FTS the goal is typically reducing overall exposure rather than fixing a cosmetic issue. Like other PFAS, it can be harder to remove than routine contaminants because it’s chemically stable and may occur at low concentrations. That makes choosing the right treatment important — standard carbon cartridges don’t all perform the same — so Windsor families usually start by testing and then selecting a PFAS-focused solution sized for whole-house protection.
For whole-house reduction of 6:2 FTS, a high-capacity activated carbon system built for PFAS is the most effective single-filter option. These systems use carbon media selected and sized to increase contact time and adsorption of organic compounds like PFAS. Installed at the point where water enters your Windsor home, a single tank treats every faucet and shower and avoids maintaining multiple small under-sink units with limited media volume.
Because PFAS removal depends on flow rate and contact time, proper sizing of the carbon tank matters as much as the media choice. A whole-house activated carbon filter should be matched to your household water use so water passes slowly enough through the bed for adsorption to occur. Routine media replacement is needed since carbon’s capacity is finite. Mr. Pure Water can evaluate Windsor homes — considering local groundwater characteristics common in Florida — and recommend a PFAS-focused whole-house carbon system that fits your needs.