Phone: 772-290-5223
info@bestwaterheater.com
Phone: 772-290-5223
info@bestwaterheater.com
Phone: 772-290-5223
info@bestwaterheater.com
Including filter system and high-performance Chloride filter.
Chloride is a common dissolved ion that shows up in many water sources and can also come from road salts, water softener discharge, or industrial runoff. In Mildred homes you may first notice it as a salty or brackish taste at the tap, particularly in cold drinking water. Chloride isn’t a microorganism, but elevated levels point to higher dissolved salts overall—useful information if you rely on a private well or experience salty-tasting water.
Besides taste, chloride can worsen corrosion in some plumbing materials when combined with other factors like pH and total dissolved solids, potentially leading to pinhole leaks, staining, or shortened appliance life. Because chloride stays dissolved, a basic sediment filter or typical taste-and-odor cartridges usually won’t remove it. Testing your Mildred water is the best first step to see if chloride is present and to choose the correct treatment for your house’s hard-water conditions.
Reverse osmosis is generally the most effective single-filter option for reducing dissolved chloride because RO membranes are designed to block ions, not just particles. An RO system can significantly lower chloride and other dissolved salts that cause a salty taste, which is why it’s often recommended when the goal is to reduce total dissolved solids rather than only address sediment or odors. In many Mildred homes an RO unit is installed at the kitchen for drinking and cooking water, since whole-house RO requires greater flow capacity and storage.
A whole-house approach in Mildred should be sized to your household demand and the measured chloride level; whole-home RO systems are possible but typically need prefiltration to protect the membrane and a storage tank to meet peak flow. Remember a water softener helps with hard water—common here due to higher mineral content—but it doesn’t remove chloride and can raise sodium and chloride in its discharge. Mr. Pure Water can test your Mildred water, identify the salty taste source, and design a whole-house RO setup that targets chloride appropriately.
772-290-5223
info@bestwaterheater.com
