Including filter system and high-performance Sodium Chloride (Salt) filter.
Sodium chloride, usually called salt, can turn up in household water for several reasons — it might be present in source water, influenced by local groundwater, or introduced during treatment or regeneration cycles. A small amount of minerals is normal, but higher salt levels make water taste brackish and leave you unsure about what you’re drinking or cooking with. For Jamieson homeowners watching their sodium intake, that invisible salt can be especially concerning since you can’t see it in the glass.
Elevated salt changes how water behaves around the house: coffee, tea and ice can carry a persistent off-taste, and fixtures and glass may develop a film that’s hard to remove. Because sodium chloride dissolves completely it passes through standard sediment filters and isn’t removed by boiling. The first practical step for Jamieson residents is a water test to determine whether the salt is coming from the incoming supply, a water softener regeneration, or another source.
When the goal is to remove dissolved sodium chloride, the most effective single-filter solution is a reverse osmosis system. RO uses a semi-permeable membrane to separate dissolved salts from water, unlike carbon or sediment filters that mainly address particles, chlorine and odors. This is the same core technology used in desalination and for lowering total dissolved solids, so when salt is the primary concern selecting the right RO membrane and configuration is more important than adding extra carbon stages.
For whole-house treatment in Jamieson, reverse osmosis is commonly installed as a dedicated system with prefiltration to protect the membrane and maintain consistent performance. Prefiltration with sediment removes particles that cause fouling, and carbon prefilters reduce chlorine that can shorten membrane life if present. Because RO produces both a purified stream and a rinse stream, correct sizing and professional installation matter for everyday household demand — Mr. Pure Water can test your water, identify the salt source, and design a whole-house RO solution sized for your home.